舰船电力系统可靠性研究初探

本文讨论了舰船电力系统可靠性研究的需求和必要性,讨论了国内外的研究现状;根据陆地电力系统可靠性研究的经验和内容,在分析舰船电力系统的区别和特殊需求后,探讨了舰船电力系统可靠性的研究内容以及研究思路和步骤;以船舶电网的拓扑结构设计中的可靠性研究为例,介绍了各种可靠性指标的计算方法;最后对未来的研究提出方向。     

高精度随动系统的变结构控制

陀螺稳定平台控制系统是控制平台框架系统快速跟踪陀螺仪的高精度随动系统,是保证平台正常工作和精度的重要系统。用传统的PID调节器可以满足工作在系统线性区的要求。由于放大器、电机等存在饱和特性,因而在系统启动和随大的干扰产生大偏角时,系统将进入非线性区,PID调节器将难以满足稳定性的要求。滑模变结构控制器对非线性具有很好的适应性,对系统启动初始偏角没有限制要求,本文将应用变结构控制的方法对平台的控制系统进行设计。     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

复合盾构土舱可视化实时监测系统研究

为了在复合盾构掘进过程中实时监测土舱的情况,获得刀盘的旋转状态、刀具的磨损状况、开挖地层的图像信息和渣土的流动特性,建立一套土舱可视化实时监测系统,该系统通过上位机监控系统实时监测前端设备的工作状态,并将摄像机采集的信号实时传输到视频采集系统。介绍该系统方案,重点探讨其结构设计、硬件设计、软件设计,并通过室内和现场试验进行验证该系统的有效性。结果表明,该系统可实现土舱的实时视频监控、录像、回放以及系统温度、湿度和压力的监测。     

双护盾TBM分体始发技术研究与在青岛地铁1号线的实施

为保证在不具备整体始发空间的条件下双护盾TBM分体始发顺利实施,以青岛地铁1号线海泊桥站为例,针对城市地铁隧道施工始发场地有限的客观条件,以实现施工功能为导向,通过配套设备的优化布置并最大限度地利用双护盾TBM自身配置实现有限场地内最经济的TBM分体始发,并对分体始发的基本方案进行探讨。经研究分析可知： 1）分体始发时双护盾TBM需具备的基本配套系统为高（低）压供电系统及控制系统、冷却水系统、液压系统、润滑系统、脂密封系统、压缩空气系统、豆砾石回填系统、注浆系统、导向系统及除尘系统; 2）通过管线、线缆的延伸,双护盾TBM可在主机与后配套之间或主机与部分后配套之间任何位置断开。     

古夫隧道软弱围岩普通型机械化配套试验性施工技术

为提高隧道软弱围岩施工安全性和加快施工进度,依托古夫隧道出口段工程,首先通过超前地质预报、监控量测、应力应变测试等判断围岩及掌子面稳定性; 然后通过超前支护、低预应力涨壳式锚杆加固围岩,提高围岩自稳能力; 最后采用普通型机械化配套大断面法施工,对围岩的拱顶沉降、周边收敛、应力应变等进行监测,通过数据分析结果指导现场施工。研究结果表明： 1)隧道软弱围岩普通型机械化配套试验性施工技术可以有效地加快施工进度,保证施工安全; 2)信息化管理可以通过数据分析结果指导现场施工,大大提升隧道施工的管理水平。     

集成GIS/BIM的盾构隧道全寿命管理系统研究

为解决在盾构隧道工程中,地理信息系统（GIS）标准缺失和建筑信息模型（BIM）分析功能薄弱的问题,在分析GIS的数据管理和BIM的数据标准基础上,建立集成GIS/BIM的盾构隧道全寿命期管理系统。首先,概括总结系统采用的技术路线; 其次,基于IFC标准扩展统一的盾构隧道信息模型,涵盖盾构隧道地质、结构、线路、施工、监测和病害等数据; 然后,介绍系统信息的关联,包括隧道编码、GIS和BIM的集成方案; 最后,以上海地铁盾构隧道为依托,描述系统在工程全寿命期的应用,包括隧道地质勘察、结构设计、运营监测和养护维护等阶段。该系统制定了统一信息模型,方便数据交换和管理,在信息模型基础上实现了信息可视化与不同分析功能,提高了盾构隧道的全寿命数字化管理水平。     

岩爆隧道柔性支护快速施工技术

为探究适合硬岩隧道岩爆段的快速施工技术,通过对硬岩隧道整体自稳性及岩爆特点的分析,提出以柔性支护为基础、以岩爆预测、松动圈测试和柔性网试验为保证措施的一种快速施工技术。依托米仓山隧道岩爆段的施工,利用陶振宇判据和Turchaninov判据对不同埋深下岩爆强度进行预测,合理划分米仓山隧道岩爆强度区段,并结合松动圈测试、柔性网试验,对锚杆和钢丝绳网的参数进行研究与验证。实践表明： 1)采用陶振宇判据和Turchaninov判据可以较准确地进行岩爆预测及强度区域划分; 2)利用松动圈测试结果能大致判断隧道开挖后围岩破裂区域的深度; 3)相比传统支护技术,采用喷射混凝土+涨壳式预应力锚杆+柔性防护网的快速支护技术,每循环施工可节省用时约4 h,整个岩爆区段施工速度可提高30%~40%。